Section 7.2 Volume by Cross-Sectional Area; Disk and Washer Methods
The volume of a general right cylinder, as shown in Figure 7.2.1, is
Area of the base × height.
We can use this fact as the building block in finding volumes of a variety of shapes.
Given an arbitrary solid, we can approximate its volume by cutting it into thin slices. When the slices are thin, each slice can be approximated well by a general right cylinder. Thus the volume of each slice is approximately its cross-sectional area × thickness. (These slices are the differential elements.)
By orienting a solid along the -axis, we can let represent the cross-sectional area of the th slice, and let represent the thickness of this slice (the thickness is a small change in ). The total volume of the solid is approximately:
Recognize that this is a Riemann Sum. By taking a limit (as the thickness of the slices goes to 0) we can find the volume exactly.
Example 7.2.4. Finding the volume of a solid.
Solution 1.
There are many ways to “orient” the pyramid along the -axis; Figure 7.2.5 gives one such way, with the pointed top of the pyramid at the origin and the -axis going through the center of the base.
Each cross section of the pyramid is a square; this is a sample differential element. To determine its area we need to determine the side lengths of the square.
When the square has side length 10; when the square has side length 0. Since the edges of the pyramid are lines, it is easy to figure that each cross-sectional square has side length giving
If one were to cut a slice out of the pyramid at as shown in Figure 7.2.6, one would have a shape with square bottom and top with sloped sides. If the slice were thin, both the bottom and top squares would have sides lengths of about 6, and thus the cross-sectional area of the bottom and top would be about 36 in2. Letting represent the thickness of the slice, the volume of this slice would then be about in3.
Cutting the pyramid into slices divides the total volume into equally-spaced smaller pieces, each with volume where is the approximate location of the slice along the -axis and represents the thickness of each slice. One can approximate total volume of the pyramid by summing up the volumes of these slices:
Taking the limit as gives the actual volume of the pyramid; recoginizing this sum as a Riemann Sum allows us to find the exact answer using a definite integral, matching the definite integral given by Theorem 7.2.3.
We have
We can check our work by consulting the general equation for the volume of a pyramid (see the back cover under “Volume of A General Cone”):
Certainly, using this formula from geometry is faster than our new method, but the calculus-based method can be applied to much more than just cones.
Solution 2. Video solution
An important special case of Theorem 7.2.3 is when the solid is a solid of revolution, that is, when the solid is formed by rotating a shape around an axis.
Start with a function from to Revolving this curve about a horizontal axis creates a three-dimensional solid whose cross sections are disks (thin circles). Let represent the radius of the cross-sectional disk at the area of this disk is Applying Theorem 7.2.3 gives the Disk Method.
Key Idea 7.2.7. The Disk Method.
Let a solid be formed by revolving the curve from to around a horizontal axis, and let be the radius of the cross-sectional disk at The volume of the solid is
Example 7.2.8. Finding volume using the Disk Method.
Solution 1.
A sketch can help us understand this problem. In Figure 7.2.9.(a), the curve is sketched along with the differential element — a disk — at with radius In Figure 7.2.9.(b) the whole solid is pictured, along with the differential element.
The volume of the differential element shown in Figure 7.2.9.(a) is approximately where is the radius of the disk shown and is the thickness of that slice. The radius is the distance from the -axis to the curve, hence
Slicing the solid into equally-spaced slices, we can approximate the total volume by adding up the approximate volume of each slice:
Taking the limit of the above sum as gives the actual volume; recognizing this sum as a Riemann sum allows us to evaluate the limit with a definite integral, which matches the formula given in Key Idea 7.2.7:
Solution 2. Video solution
While Key Idea 7.2.7 is given in terms of functions of the principle involved can be applied to functions of when the axis of rotation is vertical, not horizontal. We demonstrate this in the next example.
Example 7.2.10. Finding volume using the Disk Method.
Solution 1.
Since the axis of rotation is vertical, we need to convert the function into a function of and convert the -bounds to -bounds. Since defines the curve, we rewrite it as The bound corresponds to the -bound and the bound corresponds to the -bound
Thus we are rotating the curve from to about the -axis to form a solid. The curve and sample differential element are sketched in Figure 7.2.11.(a), with a full sketch of the solid in Figure 7.2.11.(b).
We integrate to find the volume:
Solution 2. Video solution
We can also compute the volume of solids of revolution that have a hole in the center. The general principle is simple: compute the volume of the solid irrespective of the hole, then subtract the volume of the hole. If the outside radius of the solid is and the inside radius (defining the hole) is then the volume is
One can generate a solid of revolution with a hole in the middle by revolving a region about an axis. Consider Figure 7.2.12.(a), where a region is sketched along with a dashed, horizontal axis of rotation. By rotating the region about the axis, a solid is formed as sketched in Figure 7.2.12.(b). The outside of the solid has radius whereas the inside has radius Each cross section of this solid will be a washer (a disk with a hole in the center) as sketched in Figure 7.2.13. This leads us to the Washer Method.
Key Idea 7.2.14. The Washer Method.
Let a region bounded by and be rotated about a horizontal axis that does not intersect the region, forming a solid. Each cross section at will be a washer with outside radius and inside radius The volume of the solid is
Even though we introduced it first, the Disk Method is just a special case of the Washer Method with an inside radius of
Example 7.2.15. Finding volume with the Washer Method.
Solution 1.
A sketch of the region will help, as given in Figure 7.2.16.(a). Rotating about the -axis will produce cross sections in the shape of washers, as shown in Figure 7.2.16.(b); the complete solid is shown in Figure 7.2.16.(c). The outside radius of this washer is the inside radius is As the region is bounded from to we integrate as follows to compute the volume.
Solution 2. Video solution
When rotating about a vertical axis, the outside and inside radius functions must be functions of
Example 7.2.17. Finding volume with the Washer Method.
Find the volume of the solid formed by rotating the triangular region with vertices at and about the -axis.
Solution 1.
The triangular region is sketched in Figure 7.2.18.(a); the differential element is sketched in Figure 7.2.18.(b) and the full solid is drawn in Figure 7.2.18.(c). They help us establish the outside and inside radii. Since the axis of rotation is vertical, each radius is a function of
The outside radius is formed by the line connecting and it is a constant function, as regardless of the -value the distance from the line to the axis of rotation is 2. Thus
The inside radius is formed by the line connecting and The equation of this line is but we need to refer to it as a function of Solving for gives
We integrate over the -bounds of to Thus the volume is
Solution 2. Video solution
This section introduced a new application of the definite integral. Our default view of the definite integral is that it gives “the area under the curve.” However, we can establish definite integrals that represent other quantities; in this section, we computed volume.
The ultimate goal of this section is not to compute volumes of solids. That can be useful, but what is more useful is the understanding of this basic principle of integral calculus, outlined in Key Idea 7.0.1: to find the exact value of some quantity,
- we start with an approximation (in this section, slice the solid and approximate the volume of each slice),
- then make the approximation better by refining our original approximation (i.e., use more slices),
- then use limits to establish a definite integral which gives the exact value.
We practice this principle in the next section where we find volumes by slicing solids in a different way.
Exercises Exercises
Terms and Concepts
1.
T/F: A solid of revolution is formed by revolving a shape around an axis.
2.
In your own words, explain how the Disk and Washer Methods are related.
3.
Explain the how the units of volume are found in the integral of Theorem 7.2.3: if has units of how does have units of
Problems
Exercise Group.
Use the Disk/Washer Method to find the volume of the solid of revolution formed by revolving the given region about the -axis.
4.
Graph of the region bounded by the curve and the -axis. The curve begins at -axis at the point From this point the curve rises until reaching the -axis at the point After reaching the -axis, the curve slopes down until reaching the -axis at the point The region then contains the entire area below this curve, and above the -axis.
5.
Graph of the region between and the -axis, for The line begins at the point from which it linearly increases until reaching the rightmost bound which is at the point The region then contains the entire area below the line and above the -axis for
6.
Graph of the region between and the -axis, for The curve begins at the point from which it slopes downwards until ending after reaching the -axis at the point The region then contains the entire area below the curve and above the -axis for
7.
Graph of the region between the curves and The curves and both begin at the origin. From this point the curve rises above the line until reaching the point where the curve once again intersects the line. The region then contains the area below the curve and above the line
Exercise Group.
Use the Disk/Washer Method to find the volume of the solid of revolution formed by revolving the given region about the -axis.
8.
Graph of the region bounded by the curve the -axis, and the -axis. Note that this region can reference both the regions to the left or right of the -axis, but we will consider the region to the right of the -axis. The curve begins at the point from which it slopes down until reaching the -axis. The region then contains the area to the right of the -axis, and to the left of the curve for values between and
9.
Graph of the region between and the axis, for The line begins at the point from which it linearly increases until ending upper bound for at the point The region then contains the entire area to the right of and to the left of the line for between and
10.
Graph of the region between and the axis, for The curve begins at the point from which it slopes downwards until ending after reaching the -axis at the point The region then contains the entire area to the right of and to the left of of the curve for values between and
11.
Graph of the region between the curves and The curves and both begin at the origin. From this point the curve rises above the line until reaching the point where the curve once again intersects the line. The region consists of the area to the right of the curve and the to the left line for values between and
Exercise Group.
Use the Disk/Washer Method to find the volume of the solid of revolution formed by rotating the given region about each of the given axes.
12.
(a)
Rotate about the axis.
(b)
Rotate about
(c)
Rotate about the axis.
(d)
Rotate about
13.
(a)
Rotate about the axis.
(b)
Rotate about
(c)
Rotate about
(d)
Rotate about
14.
(a)
Roate about the axis.
(b)
Roate about
(c)
Rotate about the axis.
(d)
Rotate about
15.
(a)
Rotate about the axis.
(b)
Rotate about
(c)
Rotate about
16.
(a)
Rotate about the axis.
(b)
Rotate about
(c)
Rotate about
17.
(a)
Rotate about the axis.
(b)
Rotate about
(c)
Rotate about the axis.
(d)
Rotate about
Exercise Group.
Orient the given solid along the -axis such that a cross-sectional area function can be obtained, then apply Theorem 7.2.3 to find the volume of the solid.
18.
A right circular cone with height of 10 and base radius of 5.
Image of a right circular cone with height of 10 and base radius of 5. The base of the cone is a circle of radius 5. From the center of the circle to the peak of the cone we measure the height to be 10.
19.
A skew right circular cone with height of 10 and base radius of 5. (Hint: all cross-sections are circles.)
Image of a skew right circular cone with height of 10 and base radius of 5. The base of the cone is a circle of radius 5. From the rightmost edge of the circle to the peak of the cone we measure the height to be 10.
20.
A right triangular cone with height of 10 and whose base is a right, isosceles triangle with side length 4.
Image of a right triangular cone with height of 10 and whose base is a right isosceles triangle with side length 4. The base of the cone is a right isosceles triangle having two side lengths of 4. The two sides of length 4 are connected by a right angle. Additionally, the distance from the right angle occuring at the connection of the two sides of length 4 from the base of the triangle to the peak of the cone is measured to be 10.
21.
A solid with length 10 with a rectangular base and triangular top, wherein one end is a square with side length 5 and the other end is a triangle with base and height of 5.
Image of a solid with length 10 with a rectangular base and triangular top, wherein one end is a square with side length 5 and the other end is a triangle with base and height of 5.. The rectangular base measures a length of 10 and a depth of 5. The square of side length 5 connects to the rectangle on the left side of the solid. The triangle with a base length and height of 5 connects to the rectangle on the right side of the solid. The square and triangle are then connected by two slanted trapezoidal regions on the front and back of the solid. On top of the solid is a triangle whose base of length 5 is connected to the square, having a height of 10.
You have attempted 1 of 7 activities on this page.